BRAND NEW
PART # 4097
QUICK INSTALL PUSHRODS/TUBE KIT
Strongest Quick Install pushrod on the market
Strength and rigidity of Quick Install pushrods are second only to heavy-duty one-piece pushrods
Tube material starts out as 7/16″ rod OD, then gets turned down to 3/8″ OD leaving heavy duty 7/16″ – 20 threads for the base and jam nut
0.134″ wall thickness
Jam nut slides up the pushrod
Base then loosens up into the pushrod to allow Quick Install access
Individual length exhaust and intake pushrods
Install without the removal of rocker covers
Also included in the kit are four chrome lower tubes and clips. Use in conjunction with factory inner tubes, covers, caps, springs and washers
NOTE: Correct pushrod/lifter adjustment requires starting with fully pumped up lifters.
NOTE: Quick Install pushrods have 7/16″ – 20 threads per inch. 0.050″ adjustment per turn. Two turns = 0.100″.