12V LED Light Kit + Turn Signal Horn Brake For Yamaha G29 YDR Drive 2007+ Golf
Product categories
- ATV Parts (5735)
- Bicycle Parts (7)
- Car Parts (6920)
- Farm Machinery Parts (331)
- Go Kart Parts (166)
- Golf Cart Parts (2479)
- Lawn Mower Parts (5024)
- Minibike Parts (332)
- Motorboat Parts (518)
- Motorcycle Parts (9127)
- Other Parts (849)
- Scooter Parts (700)
- Snowmobile Parts (3013)
- Tractor Parts (6673)
- UTV Parts (4450)
Product tags
12V LED Light Kit + Turn Signal Horn Brake For Yamaha G29 YDR Drive 2007+ Golf
12V LED Light Kit + Turn Signal Horn Brake For Yamaha G29 YDR Drive 2007+ Golf
Fitment:For Yamaha G29 2007-Up Gas or Electric Carts 12V Description:- Golf Cart LED Light Kit Fits For Yamaha G29 2007-Up Gas Or Electric Carts 12v,If Your Golf Cart Is 48v Or 36v,Pls Note That You Must Need A 48v-12v Or 36v-12v Voltage Reducer.
– Package Included: Golf Cart LED Light Kit And Golf Cart Universal Deluxe Light Upgrade Kit. 2x LED Head Lights, 2x LED Tail Lights, Turn Signals And Switch, Horn, Brake Lights, Harness Hardware .
– Golf Cart Headlight Tail Light Kits Come With Universal Deluxe Light Upgrade Kit ,This Deluxe Kit Included The Up-Gradable Harness, That Allows You To Extend To Brake, Hazard,Horn And Turn Signal Function.There Are Front Turn Signals As Well As Rear Turn Signals, Hazard Flasher, Head Lights And Brake Lights.(The Golf Cart Led Headlight And Tail Light Kit Are All Led Light That Are Bright Enough, So The Turn Singal Does Not With The Function Of High Beam. )
– Yamaha LED Light Kit Will Takes About 2-3 Hours To Install. If You Need Installation Instructions, Please Contact Us! What You Need To Know Before Installing
-Please Check The Product According To The Following Steps As The First Thing After You Receive The Car Light Kit. After All Parts Of The Car Light Work Well, Then Install It On The Golf Cart:
-After Installing The Wire, Connect The Power Supply (Must Be 12 Voltage ,And Make Sure The Positive And Negative Poles Is Correct )
-Turn On The Emergency Switch ( The Red One), And The Turn Signal Light Should Flash Before And After The Test. –To Check The Control Box And The Connection Line To Work Well
-Turn Off Emergency Switch And Spin The Turn Signal Switch To On, The Headlights And Taillights Should Be On,–To Check The Head Light Taillights And The Signal Switch Are All Work Well
-The Brake Lever Switch( Signal Switch) Turns To The Left And Right, The Corresponding Left And Right Signal Lights Flash—To Check Controller And Signal Switch Is Work Well
-Step On The Pedal And The Tail Light Will Brighten, Release It And Go Off.—To Check The Brake Pedal NOTE:Normal operation of the turn signal light is always on, without turn signal blinking function.