Fits For 19-20 DODGE RAM
Engines Fitment&Replace OEM#:High quality aftermarket fuel filters replaces 68436631AA
High Performance:The filter media reduces the number of harmful particles reaching the engine injectors, reduces equipment downtime and reduces the total cost of ownership (TCO). The penetration of hard particles is reduced by 10 times, which can fully protect the injector from progressive damage and extend the service life. It has twice the pollutant absorption capacity of traditional filters and is designed to deliver clean fuel to the high-pressure common rail (HPCR). The filter captures any contaminants larger than 4 microns with a filtration efficiency of over 99.6%.
Installation:No modification to the electrical system is required, plug-and-play, direct fit.Please always pre-fill clean fuel on the dirty side of the filter without opening the fuel cap.Do not reuse the old filter, it will cause great damage to the car engine. After installing the new filter, prime and start the engine, wait a few minutes, and then check for leaks.
Quality Assurance:Our shop guarantees to provide the best quality filters, where you can spend the least money to buy the best products. In addition, we will provide you with lifetime technical services. If you have any questions, you can contact us and we will solve it for you. Besides, you can also enjoy a 12-month warranty in our shop.
Specifics and Features:
Plug-and-play, direct fit, easy installation
Solid impurities (iron oxide and dust, etc.) in the fuel are filtered out.
Protect oil pump nozzle, cylinder liner and piston ring.
Significantly reduce wear and avoid clogging
10X reduction in hard particle penetration fully protects the fuel injector against progressive damage.Deliver longer life.
2X the contaminant holding capacity of conventional filters.
Exceeds 99.6% filtration efficiencyby trapping any contaminants larger than four microns.
Installation Tips:
1.Always pre-fill with clean fuel on the dirty” side of the filter with the pre-fill cap ON.
2.Always recycle the used filter, DO NOT reuse.
3.After installing a new filter, prime and start the engine and wait for a few minutes, then check for leaks.