- Product Name:Carburetor for Briggs & Stratton
- MOQ:1 PC
Carburetor working principle
First fuel is supplied into the float chamber through strainer. Strainer works as a filter. It does not allow dust and other suspended particles into the float chamber which can choke any fuel passage.
The float maintains a constant level of fuel into float chamber. If the amount of fuel in the float chamber goes down below designed limit, the float goes down which opens the fuel supply valve and allow fuel to flow into float chamber. If the fuel reaches designed limit,the float goes up, which closes the fuel supply valve and thus stop fuel supply into float chamber.
The fuel discharge nozzle connects float chamber to venturi tube. The one end of fuel supply nozzle connected to the bottom of the float chamber and other one is to the venturi tube slightly above the designed fuel level in the float chamber. This will avoid overflow when engine is not running.
During suction stroke air is drawn into cylinder through venturi tube. Venturi is a tube of decreasing cross section and has a minimum area at throat. The fuel supply nozzle connects at the throat of venturi tube.? This air has maximum velocity at throat. Due to this high velocity, the pressure at the throat goes down below float chamber pressure.
This will create a pressure difference between float chamber and venturi tube. This pressure difference is known as carburetor depression. It acts as driving force for fuel. It drives fuel from float chamber to venturi tube through fuel supply tube and the fuel is discharged into the air stream.