Pillow Block Bearing, Bearing Steel hickened Mounted Self Aligning Rhombic Bearing3/4 inch 2 Bolt Pillow Block Flange Bearing, Self-Alignment, Brand New(2 Pack -UCFL204-12)

Pillow Block Bearing, Bearing Steel hickened Mounted Self Aligning Rhombic Bearing3/4 inch 2 Bolt Pillow Block Flange Bearing, Self-Alignment, Brand New(2 Pack -UCFL204-12)

SKU: ZCZ.00019 Category: Tag:
Spread the love
(Last Updated On: October 21, 2021)

Cast iron UCFL204-12 flange block housing increases life of the bearing
pillow block bearing 3/4 UC204-12 chrome steel bearing for efficient operations at a wide range of speeds
pillow block bearing 3/4 inch shaft Dynamic (radial) load rating of 12.8 kN and static (axial) load rating of 6.65 kN
pillow block bearing Set screw prevents shaft slippage
Dimensions: Item: UCFL204-12 Bearing Type: Mounted Bearings Bolt Size: M10 Basic Load (Cr): 12.8 KN Basic Load (Cor): 6.65 KN Bearing No: UC204-12 Bore: 3/4″ Bolt hole to bolt hole: 3.543 in. (90mm) Overall length: 4.448 in. (113mm) Overall thickness: 1.312 in. (33.12mm) Bolt hole: 452 in. (11.5mm) Temp. Range: -40 Degrees to 250 Degrees F
This UCFL204-12 bearing has a cast iron flange housing, two bolt holes, and a 3/4″ inside diameter. This ready-to-mount unit requires two M10 mounting bolts (sold separately). It has chrome steel bearings and is designed for efficient operation at a wide range of speeds. The bearing has a dynamic (radial) load rating of 12.8 kN and a static (axial) load rating of 6.65 kN. The unit is secured to the shaft with set screws to prevent slippage. This bearing is most commonly used in mechanical equipment with moderate loads and shaft speeds and where the shaft and mounting surface are perpendicular to each other. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Contact Us