Quality Guarantee wear resistant Briggs & Stratton 492932S Oil Filter

Product Name Briggs & Stratton Oil Filter
Size 7.7×7.7×6.1cm
Height 2-1/4″
OD 3″
Seal OD 2-13/16″
Mounting thread 3/4″-16
Quality High-Quality
MOQ 1 PC
CPNO KQLX.00060
SKU: KQLX.00060 Category: Tag:
Spread the love
(Last Updated On: September 22, 2020)

Features:

Brand-new, genuine Briggs & Stratton Oil Filtert, part# 492932

Compatible with Vanguard engines 5 – 14 HP

Height: 2-1/4″ OD: 3″ Seal OD: 2-13/16″

Mounting thread: 3/4″-16

Product Name Briggs & Stratton Oil Filter
Size 7.7×7.7×6.1cm
Height 2-1/4″
OD 3″
Seal OD 2-13/16″
Mounting thread 3/4″-16
Quality High-Quality
MOQ 1 PC
CPNO KQLX.00060

How to Change Oil in a Briggs & Stratton 5500 Generator??

Step 1 Turn on the generator and allow it to run for a few minutes to heat up the oil. Warm oil is easy to change because it has a more liquified consistency, which allows it to drain out of the generator more completely.Step 2 Place the generator on a level surface and disconnect the spark plug wire. Place the spark plug wire in a place on the generator that allows no possibility of it coming into contact with the spark plug as you’re changing the oil.

Step 3 Wipe any oil and grime away from the oil drain plug so you can see what you’re doing.

Step 4 Place a plastic oil pan beneath the oil drain plug, then remove the plug. The oil will drain out of the engine and into the oil pan.

Step 5 Replace the oil drain plug and ensure that it’s tightened completely.

Step 6 Remove the oil cap from the oil filler tube.

Step 7 Pour the engine oil into the oil filler tube until the oil nearly reaches the top of the tube.

Step 8 Replace the oil cap.

Step 9 Connect the spark plug wire.

Step 10 Start the generator and allow the oil to move throughout the engine so the generator is lubricated with new oil.

Contact Us

Reviews

There are no reviews yet.

Be the first to review “Quality Guarantee wear resistant Briggs & Stratton 492932S Oil Filter”

Your email address will not be published.